Blog RSS Feed

From our experience.  If the rim itself is defective, you will find the problem within 3 months of use.2 major reasons for the deformation of the MTB ..

For the moment, we provide 2 options to solve the carbon rim's balancing problem. -Adding an aluminum sheet (opposite the valve). we advise you to use..

https://www.carbonbikekits.com/carbon-spokesCarbon spokes weight about 3kg each piece, it is cool!Using carbon spokes is good to make lightweight whee..

It is highly probable that the price of carbon fiber bicycle parts will increase by 10% in 2023. In 2022, the Chinese Yuan will depreciate by more tha..

错误的辐条孔角度将使您在组装碳轮时遇到大问题。这将导致辐条弯曲。正常情况下，轮辋角度为 6 度。1. 对于 2:1 孔，除了 G3 孔，通常我们有 A 和 B 2 种类型，请告知我们的销售人员您需要哪种轮胎。21 孔，2:124 孔，2:12. 特殊なハブをお使いの場合は、スポーク穴の角度をカスタマ..

Absolutely, Has obvious advantages for the rim without holes in the rim groove.1. we do not need to use rim tape.2. Do not worry about the air leakage..

The reason to drill a hole on the rim side.1. we also call it a"water hole". drain the water from the inner rim.2.  when inflation tire air escapes in..

The melting point of the high-temperature resistant resin used for the carbon fiber wheel rim is 160 ℃. so keep your carbon wheels away from the exhau..

The carbon rim will melt if improperly used.We can avoid rim melt as below process. 1 ) Just buy a high TG carbon rim for your carbon wheels. Resin is..

Asymmetrical rims build up into stiffer, stronger, and more reliable wheels by improving the bracing angles of a dished wheel and equalizing the spoke..

- Place rim on pre-assemble support tool ( if you are an individual user do not need this tool. Place hub on a pre-assemble support toolPut some greas..