- Model: AW47C-32 / AW47C-32H
Available Options
Click: Order Option " Customize Wheelset ", and choose the hub and spokes, you will find the price for 1 pair complete wheelset.
Rim Shape
Rim Brake Has Brake Surface. Disc Brake not Brake Surface.
T700 Normal Weight Version: 100% Toray T700 Carbon Fiber.
T800 LightWeight Version: Mix 70% Toray T700 and 30% T800 Carbon Fiber.
Ultralight Version: 100% T800 Carbon Fiber. Rider Weight Limited 90kg, UD Paintless Weave Only. Rim Brake Version Weight Will Incrase by 10g.
Superlight T1000 Version: Mix 70% Toray T800 and 30% T1000 Carbon Fiber. No Rider Weight Limited, UD Paintless Weave Only.Rim Brake Version Weight Will Increase by 10g.
Note: Ultralight / Superlight weight is for UD Paintless only, 3K/12K/Marble weight increases 10 g- 15 g .
Note : If you want make Inner Nipple Wheel Must choose Have Rim Groove Hole
Note: Without Rim Groove Holes, The rim do not need use tapes.
If you want make Inner Nipple Wheel Must choose Have Rim Groove Hole
"A" is Opposite the Valve Hole
Custom Logo
Please contact with us to check the design and cost [email protected]
"FLASH" Logo
"CarbonBikeKits" Valve sticker only
Related
Specifications
| Rim | |
| Material | Toray Carbon T700 / T800 |
| Outer Width | 32mm |
| Hight | 42-47mm |
| ERD | 545mm |
| Tubeless | |
| Tubeless Model No. | AW47C-32 / AW47C-32H |
| Inner Width | 25mm |
| Tubeless T700 Weight | 460±15g |
| Tubeless T800 Weight | 420±15g |
| Tubeless Ultralight Weight | 380±15g |
| Tubeless Superlight T1000 Weight | 360±15g |
| Feature | |
| Max Spoke Tension | 120-135kgf |
| Rider Weight Limit | Standard 135kg/298lbs, Ultralight Version 90kg/198lbs |
| Max Tire Pressure | Hooked 110PSI/7.58bar,Hookless 75PSI/5.17bar |
| Recommended Tire Width | 28mm-38mm |
Asymmetric Wave Crest Design
Each ArcWave™ crest features an intentionally asymmetric width profile, with one side wider and the other narrower.
The wider side is positioned to support the direction of greater spoke entry angle and lateral load, increasing contact area and reducing localized shear stress at the spoke interface. This improves structural stability under high tension and dynamic riding loads.
The narrower side reduces unnecessary material where loads are lower, preserving controlled compliance and minimizing overall rim weight. This asymmetric crest geometry allows the rim to better align with real-world spoke angles, reducing spoke head bending and promoting more consistent tension balance.
By reinforcing strength only where it is required, ArcWave™ achieves higher durability and stiffness without sacrificing weight efficiency.
Bicycle Wheel Weight Calculator
After selecting the rims,hub,and spokes, the weight information is listed below the table.wheelset use other hub and spokes ,you can check the weight with [email protected]
| Rim | Hub | Spokes |
| 47x32mm Tubeless T700 | RAT-HUB-C1 | Carbon Spokes:CSK01 Lightweight 2.8mm width |
| 47x32mm Tubeless T800 | Carbon Spokes:CSK02 3.5mm widht | |
| 47x32mm Tubeless Ultralight T800 | Carbon Spokes:CSK03 5mm width | |
| 47x32mm Tubeless Ultralight T1000 | ||
| 47x32mm Tubular T700 | ||
| 47x32mm Tubular T800 | ||
Reviews Over ArcWave™ 47×32 Carbon Rim with Asymmetric Wave Spoke Bed 20Holes
Total Reviews (0)
click here write review to add review for this product.